New Heyco Solar Products
New Heyco Solar Products

Heyco's Sun Products Catalog for 2016 includes a wide range of all-new products as well as new variations on existing ones, and expanded regulatory approvals.

Request the new 80-page catalog using the "My Request" tab. Download individual catalog pages in the link section.

heyco cover

Here's a summary of the all-new products contained in the 2016 catalog.

Heyco®-Tite  Solar Masthead®Metal Liquid Tight Cordgrips

heyco master

Multi-Hole, NPT Hubs - IP 68 Rated The Ultimate in Liquid Tight Strain Relief Protection

  • Break-Thru Skinned-Over glands offer flexiblity to use from 1 to 31 of the available holes while still providing a liquid tight seal around the wire.
  • Rolled grease-free threads prevent galling and allow for multiple assemblies and disassemblies.
  • Approved for NEMA 4, 4X, 6 and 6P applications.
  • Self-retaining sealing rings eliminate the need for an O-Ring groove, thus reducing cost.
  • Stainless Steel ideal for corrosive environments.
  • Aluminum a less costly solution for robust environments.
  • Provide a watertight seal for PV module output leads to inverters.
  • Secure input PV leads from solar panel array strings to fuse holder hookup within solar combiner boxes.

HEYClip™ Stainless Steel SunRunner® 90° Double-Wire Cable Clips

sunclip

Accommodates two cables from 0.20˝ (5,1 mm) to 0.30˝ (7,6 mm). Double-Compression, Right Angle Design

  • Smooth clip edges prevent damage to cable insulation.
  • For PV modules mounted in the “landscape” mode. PV modules with shorter than normal junction box cables cannot be dressed out to the sides of the module.
  • The SunRunner 90° will allow the junction box cables to be run to the adjacent modules across the short side of the PV module frame.

HEYClip™ Stainless Steel SunRunner® 2-S Series Cable Clips

sun runner s2

For Rail-less Systems

  • Designed to hold Micro-Inverter Cables 0.413˝ (10,5 mm) to 0.472˝ (12,0 mm) and Module Cables up to .300˝ (7,6 mm) in diameter for rail-less mounting systems.
  • Constructed from heat treated 410 stainless steel for excellent strength and corrosion protection for outdoor exposure.
  • Smooth clip edges prevent damage to cable installation.
  • Designed for panel and cable retention up to 15 lbs.
  • Neatly dress cables on PV panels or module frames from .050˝ (1,3 mm) to 0.250˝ (6,4 mm) thick.

HEYClip™ SunRunner® CT Cable Tie Mounting Platforms

platform

Stainless Steel Edge Clip

  • Designed to easily mount to module or frame extrusions without the need for mounting holes or adhesives.
  • Designed to be used with Heyco Stainless Steel Cable Ties up to 0.31˝ (8,0 mm) width or Heyco SunBundler Stainless Steel Wire Cable Ties.
  • Hold cable bundles parallel or perpendicular to the mounting frame.
  • Generous lead-in for installation without tools.
  • Constructed from corrosion resistant 304 stainless steel.
  • SunRunner CT-EZ designed for thicker module frames as well as racking systems - accommodates profiles up to 0.250˝ (6,4 mm) thick.
  • UL Listed per UL 1565.

HEYClip™ Vinyl Coated Spring Clamps

spring clamp

  • Secures round cable, ribbon cable, and tubing.
  • Vinyl coating protects and insulates.
  • Mounts with a #6 (M3,5) screw, yet cable can be inserted and removed without removing the clip.

Heyco® Nytyes® with Stainless Steel Locking Device

Heyco

  • Metal pawl for high strength and better durability.
  • Self-locking head design speeds installation and locks into place at any length along the tie body.
  • Provide a strong, durable method of cable bundling.
  • Can be used in a wide range of indoor, outdoor, and underground (including direct burial) applications.
  • Smooth surfaces and rounded edges assure cable protection and worker safety.

Heyco® Stainless Steel Cable Ties

cable ties

Ball Lock Stainless Steel Strip Cable Ties - Standard and PVC Coated - now available in marine grade stainless steel (AISI 316)

  • Stainless steel cable ties have more strength and better durability than nylon cable ties.
  • Locking-ball design for maximum holding strength and ease of installation.
  • Coated ties offer additional protection and separation of dissimilar metals for improved corrosion resistance.
  • Custom lengths available.

Heyco® Steel Cushion Clamps

cushion clamps

  • 187" (4.7mm) to 1.25" (31.8mm) dia.
  • Light to heavy duty steel clamp.
  • P.D.M. cushion for electrical insulation and vibration absorption.
  • Steel clamps are zinc electroplated for corrosion resistance.
  • Color - Silver with durable black cushion.

Heyco® SunScreener®Wire Mesh Clip

screen kit

Now available as a kit. 36 pcs of S6437 SunScreen Clips bundled together with one 100' Roll of SunScreen Wire Mesh.

  • Helps protect solar panels from rodents and nesting birds with wire mesh screening (included in new kits).
  • Constructed from 303 and 304 Stainless Steel for maximum endurance to outdoor elements.
  • 303 Stainless Steel J-Hook easily attaches to the solar panel frames and can easily be trimmed or bent after assembly.
  • 304 Stainless Steel Washers will firmly hold wire mesh screen to the module assembly.
  • Does not violate panel integrity.
  • Installs quickly and easily with standard linesman pliers
  • Black color available for those applications subject to HOA appearance restrictions.
  • Stainless Steel Washers are offered in both steel color and black-painted versions.

Heyco®-Tite Liquid Tight Cordgrips

Split Gland for Pre-assembled Cables with Integral Sealing Ring

  • Split Glands are designed for application to the cable after the cable has passed through the LTCG; e.g., RJ45 cable with Cat5e termination.
  • Simply pass the cable termination through the LTCG body, apply Split Gland to the cable, and insert the gland/cable assembly into the LTCG fingers. Then tighten the Sealing Nut to achieve a liquid-tight seal.
  • Integral Sealing Ring ensures a superior seal at the clearance or threaded mounting hole location, every time.

HEYbrid™ Aluminum Liquid Tight Cordgrips

stainless cord

Straight-Thru, NPT Hubs

  • HEYCo-molded gripping finger/gland technology accommodates the widest cable range over the fewest SKUs.
  • Rolled grease-free threads prevent galling and allow for multiple assemblies and disassemblies. No messy, unsightly thread lubrication required.
  • Approved for NEMA 4, 4X, 6 and 6P.
  • Self-retaining sealing rings eliminate the need for an O-Ring groove, thus reducing cost.
  • Aluminum construction provides excellent durability and performance for most industrial applications.
  • For use in both indoor and outdoor applications to prevent cable pull-out, control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture, and coolants.
  • Sealing washer required for through-hole applications only.

HEYbrid™ Stainless Steel Liquid Tight Cordgrips

stainless

Straight-Thru, NPT Hubs

  • HEYCo-molded gripping finger/gland technology accommodates the widest cable range over the fewest SKUs.
  • Rolled grease-free threads prevent galling and allow for multiple assemblies and disassemblies. No messy, unsightly thread lubrication required.
  • Approved for NEMA 4, 4X, 6 and 6P.
  • Self-retaining sealing rings eliminate the need for an O-Ring groove, thus reducing cost.
  • Sealing washer required for through-hole applications only.
  • Ideal for corrosive environments.
  • Constructed from corrosion resistant 303 stainless steel.
  • Resistant to salt water, acids and most chemicals.
  • Patent pending.

HEYClean® Brass Pressure Equalization Plugs

pressur plugs

  • Allow the passage of air for ventilation and heat dissipation, yet prevent moisture intrusion.
  • Filter membrane prevents moisture and particulate contamination in electronic enclosures.
  • Pressure compensating seal prevents buildup of pressure inside of electronic enclosures due to environmental temperature cycling.
  • Quick and easy installation into Clearance or Threaded Holes.
  • Nickel-plated finish over brass provides excellent corrosion resistance and durability.
  • Head Thickness: .37˝ (9,5 mm) to 0.39˝ (10 mm).
  • Hex shaped body for wrench installation.
  • Filter element: Liquid Tight Membrane: Polyethersulfone (PES); Sintered Disc: Bronze

HEYClean® Brass Drain Plugs

lock washer

  • Drainage Plugs are ideal for applications where condensation is expected.
  • Stainless steel mesh allows water to drain quickly, but protects enclosure from bugs and dust.
  • Cutout section to allow water to completely drain from enclosure, and should be installed at enclosure’s lowest point.
  • Head Thickness: 0.37˝ (9,5 mm) to 0.39˝ (10 mm).
  • Hex shaped body for wrench installation.
  • Locknuts available

HEYClip™ Tension Wire Clips - Nylon

clips nylon

  • Adhesive-Back Mount
  • Gather and direct cables singly or in groups smaller than those accommodated by other Heyco Wire Holders.

Heyco® Nytye® Nylon Cable Ties

nylon cable ties

  • Smooth, radiused edges ensure that Nytyes won’t cut into the cable’s insulation–or the installer’s hand.
  • One-piece design reduces cost and installation time.
  • Nytyes feature a bent tip for ease of pickup and insertion around small bundles. V-shaped raised ridges on the tip provide a sure grip.
  • Close, evenly spaced teeth permit fine adjustment–from .025˝ (0,6 mm) on the smallest Nytyes to 0.063˝(1,6 mm) on the largest..
  • Compliant with MS3367 and MIL-S-23190E

Heyco® Continuous Grommet Rolls

grommet rolls

  • Polyethylene or Nylon in 100' (30.5M) Rolls
  • Grommet Strips protect against damage from sharp panel edges.
  • Ideal for tight radii or irregular panel holes and cut-outs.

Heyco® Grommet Channel

gromett channel

TPE “DS” Channel - Unserrated, MDS Filled in 48" (122cm) Strips or 100' (30.5 M) Rolls

  • This flexible Grommet Channel is ideal for protecting panel edges from being damaged.
  • For use as wear strips, non-abrasive edging, noise-reducing conveyor strips, framing, or to protect from sharp edges.
  • Good durability; MDS glue filling adheres to rubber, most plastics, wood and metal.
  • Features built-in lubricant for reduced friction and longer part life.

Heyco® Grommet Channel

Polystyrene Channel - 48" (122 cm) Lengths

  • Binds and frames sharp edges.
  • May be cut to desired lengths.
  • Available by special order only.
Featured

Related Articles

No related articles found.

Powered by Innovasium
My Request

Request List


    ICON
    Info

    QUOTE
    Quote

    SAMPLE
    Sample

    Contact

    Thank you for your request. An IRWIN Sales Representative will contact you shortly.